General framework for parameter optimization in imaging interferometric lithography

Eric Shyh-Tsorng Wu; Balu Santhanam; Steven Roy Julien Brueck

doi:10.1117/1.1898246

1 April 2005 General framework for parameter optimization in imaging interferometric lithography

Eric Shyh-Tsorng Wu, Balu Santhanam, Steven Roy Julien Brueck

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 4, Issue 2, 023009 (April 2005). https://doi.org/10.1117/1.1898246

Abstract

Imaging interferometric lithography (IIL) employs the resolution enhancement technique (RET) of off-axis illumination (OAI) to overcome the spatial frequency resolution limitations that are imposed by the band limitedness of a conventional optical lithography system. IIL improves upon the aerial image resolution of a conventional optical lithography system by providing a wavelength division multiplexing approach toward the attainment of the maximum spatial frequency coverage of 2/λ, which is independent of the numerical aperture of the optical system. IIL combines OAI, which provides access to higher spatial frequencies of the mask, with multiple exposures and several different configurations of the polarization parameters, the frequency parsing parameters, and the exposure energy ratios are possible. Although experiments detailing the resolution enhancement capabilities of IIL in isolated parameter settings exist, a unified approach toward parameter optimization in IIL that would enable automated software for TCAD is presently lacking. With the objective of providing a framework for parameter optimization in IIL, we propose in this paper, an approach that encompasses: (a) polarization diversity in the different on-axis or off-axis exposures of IIL, (b) an aggregate error metric for evaluating aerial image quality, (c) a block-based optimization process that incorporates the proposed error metric on representative, smaller blocks of the mask, (d) an optimization process that determines the optimal parameter settings for the entire mask using the lessons learned from the blocks. This framework for optimization of parameters in IIL enables comparison of IIL with other contemporary RETs and also enables the study and analysis of hybrid approaches such as combinations of IIL with optimal proximity correction. Simulation results that demonstrate the efficacy of the IIL-based approach and reinforce its capabilities as a viable RET for subwavelength optical lithography are presented.

©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Eric Shyh-Tsorng Wu, Balu Santhanam, and Steven Roy Julien Brueck "General framework for parameter optimization in imaging interferometric lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 4(2), 023009 (1 April 2005). https://doi.org/10.1117/1.1898246

Published: 1 April 2005

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available