Special Section on Nanopatterning

Numerical analysis of effects of mold features and contact friction on cavity filling in the nanoimprinting process

[+] Author Affiliations
H. Hocheng

National Tsing Hua University, Department of Power Mechanical Engineering, Hsinchu, Taiwan

C. C. Nien

National Tsing Hua University, Department of Power Mechanical Engineering, Hsinchu, Taiwan

J. Micro/Nanolith. MEMS MOEMS. 5(1), 011004 (March 10, 2006). doi:10.1117/1.2177286
History: Received January 01, 2005; Revised March 01, 2005; Accepted July 01, 2005; Published March 10, 2006
Text Size: A A A

Nanoimprinting has been recognized as a highly potential method of volume production for nanoscale devices. In the nanoimprinting process, the filling process of the mold cavity plays a key role in determining the productivity of the nanoimprinting process and the quality of the final imprint product. A defective filling of the mold affects the uniformity, precision, and throughput of the imprint. The mold filling is subjected to the applied imprinting pressure and temperature, repetitive mold use, mold sticking, or factors regarding mold features. It involves physical contact between the mold and the polymer layer on the substrate surface; thus, how the polymer fills up the cavity is of major interest and is vital in pattern transfer. The proposed study employs a finite element model for the single mold cavity to simulate the nanoimprint process. The mold is assumed to be a linear elastic body and the polymer preheated above its glass transition temperature is considered to be nonlinear elastic, described by the Mooney-Rivlin model. The numerical model is able to predict the mold filling at any nanoimprint stage and the mold cavity with various aspect ratios. To study the effects of pattern density and contact friction existing between the mold and polymer during the mold filling of the nanoimprinting process, an imprint mold with mixed pattern density is simulated and a sensitivity analysis of a contact friction coefficient on the mold filling is performed. Both the cavity feature and pattern density have significant effects on mold filling of the nanoimprinting process, while the contact friction coefficient has a mild effect. The obtained results support the development of a process recipe and automatic large-scale industrial production for nanoimprinting.

Figures in this Article
© 2006 Society of Photo-Optical Instrumentation Engineers

Citation

H. Hocheng and C. C. Nien
"Numerical analysis of effects of mold features and contact friction on cavity filling in the nanoimprinting process", J. Micro/Nanolith. MEMS MOEMS. 5(1), 011004 (March 10, 2006). ; http://dx.doi.org/10.1117/1.2177286


Tables

Access This Article
Sign in or Create a personal account to Buy this article ($20 for members, $25 for non-members).

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging & repositioning the boxes below.

Related Journal Articles

Related Book Chapters

Topic Collections

Advertisement
  • Don't have an account?
  • Subscribe to the SPIE Digital Library
  • Create a FREE account to sign up for Digital Library content alerts and gain access to institutional subscriptions remotely.
Access This Article
Sign in or Create a personal account to Buy this article ($20 for members, $25 for non-members).
Access This Proceeding
Sign in or Create a personal account to Buy this article ($15 for members, $18 for non-members).
Access This Chapter

Access to SPIE eBooks is limited to subscribing institutions and is not available as part of a personal subscription. Print or electronic versions of individual SPIE books may be purchased via SPIE.org.