1 January 2006 Maskless fabrication of nanogap electrodes by using Ga-focused ion beam etching
Takashi Nagase, Kenji Gamo, Rieko Ueda, Tohru Kubota, Shinro Mashiko
Author Affiliations +
Abstract
We develop maskless fabrication methods using sputter etching with Ga-focused ion beams (FIBs) to obtain nanogap electrodes with high reproducibility. This method is based on in situ monitoring of etching steps by measuring current through patterned electrode films. The etching steps are terminated electrically at a predetermined current level. In the present experiment, 30-keV Ga FIBs with beam size of ~12 nm is irradiated, and the effect of film structures and monitoring current is investigated to obtain reliable fabrication methods. We find that electrode gaps much narrower than the beam size can be reproducibly fabricated. The controllability of the fabrication steps is significantly improved by using triple-layered films consisting of a thin Ti top, an Au electrode, and a bottom Ti adhesion layer. The minimum gap width achieved is ~3 nm, and the fabrication yield reached ~90% for ~3- to 6-nm-wide gaps. Most of the fabricated nanogap electrodes show high insulating resistance ranging from 1 GΩ to 1 TΩ.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Takashi Nagase, Kenji Gamo, Rieko Ueda, Tohru Kubota, and Shinro Mashiko "Maskless fabrication of nanogap electrodes by using Ga-focused ion beam etching," Journal of Micro/Nanolithography, MEMS, and MOEMS 5(1), 011006 (1 January 2006). https://doi.org/10.1117/1.2172614
Published: 1 January 2006
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 9 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Electrodes

Gold

Nanolithography

Nanowires

Thin films

Resistance

Back to Top