Predicting distortions and overlay errors due to wafer deformation during chucking on lithography scanners

Kevin T. Turner; Sathish Veeraraghavan; Jaydeep K. Sinha

doi:10.1117/1.3247857

1 October 2009 Predicting distortions and overlay errors due to wafer deformation during chucking on lithography scanners

Kevin T. Turner, Sathish Veeraraghavan, Jaydeep K. Sinha

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 8, Issue 4, 043015 (October 2009). https://doi.org/10.1117/1.3247857

Abstract

Chucking of substrates with wafer shape and thickness variations results in elastic deformation that can cause significant in-plane distortions that lead to overlay errors in lithographic patterning. As feature sizes shrink, overlay errors due to the combination of wafer geometry and chucking become a larger fraction of the error budget and must be controlled. We use a finite element model and a lithographic correction postprocessing scheme to predict in-plane distortions that result from chucking wafers with shape variations. We then use the predictions of in-plane distortions at two different patterning steps to calculate the component of overlay error that arises from localized shape variations. Using the model, in-plane distortion and overlay errors due to chucking are examined for multiple wafers with different geometries. The results show that long spatial wavelength shape variations cause significant distortion, but can largely be mitigated through the use of simple first-order corrections that are applied in typical lithography scanners. In contrast, high-frequency spatial variations cause distortions that cannot be corrected and hence lead to meaningful overlay errors. The results provide fundamental insight into chucking-induced overlay errors and can serve as a basis for the development of higher order scanner correction schemes that explicitly account for the wafer geometry through high-density wafer shape measurements.

©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Kevin T. Turner, Sathish Veeraraghavan, and Jaydeep K. Sinha "Predicting distortions and overlay errors due to wafer deformation during chucking on lithography scanners," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(4), 043015 (1 October 2009). https://doi.org/10.1117/1.3247857

Published: 1 October 2009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available