1 July 2011 Investigation of the influence of structural parameters of a Fresnel-type lens on the narrowing of light-emitting diode light beams
Chi-Chang Hsieh, Pa-Yee Tsai, Yan-Huei Li, Cheng-Wen Fan
Author Affiliations +
Abstract
In this study, an influence of the structural parameters of a three-dimensional (3D)-Fresnel-based lens which was designed as a primary optic on the narrowing of light-emitting diode (LED) light beams has been investigated and proposed to gather the emitted light into a narrow-angle light beam. Most conventional LEDs are not able to create a narrow-angle light beam without using a reflector cup or secondary optics, because the LED lighting angle is usually wide (±30 deg from the centerline of the light source). Nevertheless, the energy of the LED light within the range ±16 deg from the centerline of the light source can be greatly enhanced by the focusing effect of a 3D-Fresnel-based lens design as shown in this study. The illumination and the luminous flux of the LED light beam in comparison with the conventional LED have been respectively enhanced up to 61% and 20% respectively. The main contribution of this study is to adjust the height/width ratio of the ladder-shaped structure of a 3D-Fresnel-based lens in order to focus the LED light into a stronger beam, and to meet some specific working circumstances.
Chi-Chang Hsieh, Pa-Yee Tsai, Yan-Huei Li, and Cheng-Wen Fan "Investigation of the influence of structural parameters of a Fresnel-type lens on the narrowing of light-emitting diode light beams," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(3), 033005 (1 July 2011). https://doi.org/10.1117/1.3606577
Published: 1 July 2011
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Binary data

Packaging

LED lighting

Light sources

Light sources and illumination

Light

RELATED CONTENT

Design of collimating system for LED source
Proceedings of SPIE (December 31 2013)
Free-form lens design for LED indoor illumination
Proceedings of SPIE (November 15 2010)
Configurations of LED arrays for uniform illumination
Proceedings of SPIE (October 21 2004)
Study on optical design method for LED extended sources
Proceedings of SPIE (October 06 2010)

Back to Top