Fabrication of pyramidal corrugated quantum well infrared photodetector focal plane arrays by inductively coupled plasma etching with BCl3/Ar

Jason Sun; Kwong-Kit Choi; Unchul Lee

doi:10.1117/1.JMM.11.4.043003

1 October 2012 Fabrication of pyramidal corrugated quantum well infrared photodetector focal plane arrays by inductively coupled plasma etching with BCl3/Ar

Jason Sun, Kwong-Kit Choi, Unchul Lee

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 11, Issue 4, 043003 (October 2012). https://doi.org/10.1117/1.JMM.11.4.043003

Abstract

We developed an optimized inductively coupled plasma etching process to produce gallium arsenide (GaAs) pyramidal corrugated quantum well infrared photodetector focal plane arrays (C-QWIP FPAs). A statistically designed experiment was performed to optimize the etching parameters. The resulting parameters are discussed in terms of the effect on the etching rate and profile. This process uses a small amount of mask corrosion and the control of the etching mask gap to give a 45 deg to 50 deg V-groove etching profile, which is independent of the crystal orientation of GaAs. In the etching development, scanning electron microscope was used to observe the surface morphology and the pattern profile. In addition, x-ray photoelectron spectroscopy was used to obtain the elemental composition and contamination of the etching surface. It is found that extremely small stoichiometric change and surface damage of the etching surface can be achieved while keeping a relatively high etching rate and ~ 45 degV-groove etching profile. This etching process is applied to the fabrication of pyramidal C-QWIP FPAs successfully, which are expected to have better performance than the regular prism-shaped C-QWIPs according to electromagnetic modeling.

Citation Download Citation

Jason Sun, Kwong-Kit Choi, and Unchul Lee "Fabrication of pyramidal corrugated quantum well infrared photodetector focal plane arrays by inductively coupled plasma etching with BCl3/Ar," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(4), 043003 (1 October 2012). https://doi.org/10.1117/1.JMM.11.4.043003

Published: 1 October 2012

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available