Phase defect mitigation strategy: unveiling fiducial mark requirements on extreme ultraviolet lithography masks

Tetsunori Murachi; Tsuyoshi Amano; Sung Hyun Oh

doi:10.1117/1.JMM.12.2.023008

31 May 2013 Phase defect mitigation strategy: unveiling fiducial mark requirements on extreme ultraviolet lithography masks

Tetsunori Murachi, Tsuyoshi Amano, Sung Hyun Oh

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 12, Issue 2, 023008 (May 2013). https://doi.org/10.1117/1.JMM.12.2.023008

Abstract

For extreme ultraviolet lithography (EUVL), the fabrication of defect free multi-layered (ML) mask blanks is a challenge. ML defects are generated by substrate defects and adders during ML coating and are called phase defects (PDs). If we can accept ML blanks with a certain number of PDs, the blank yield will be drastically increased. We can use fewer PD blanks and reduce PD influence by covering them with an absorber layer. To do this, PDs should be located during ML blank defect inspection before absorber patterning. To locate PDs on blanks accurately and precisely, the fiducial marks (FMs) on ML blanks can be used for mask alignment. The defect location accuracy requirement is below 10 nm. We present the results of a feasibility study on the requirements of FMs on EUVL masking by simulations and experiments to establish a PD mitigation method with the EUV actinic blank inspection tool. Based on the results, the optimum ranges for FM lines etched into the ML are 3 to 5 μm in width and at least 100 nm in depth.

Citation Download Citation

Tetsunori Murachi, Tsuyoshi Amano, and Sung Hyun Oh "Phase defect mitigation strategy: unveiling fiducial mark requirements on extreme ultraviolet lithography masks," Journal of Micro/Nanolithography, MEMS, and MOEMS 12(2), 023008 (31 May 2013). https://doi.org/10.1117/1.JMM.12.2.023008

Published: 31 May 2013

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available