Presentation
14 May 2019 A Luneburg lens for the THz region (Conference Presentation)
Author Affiliations +
Abstract
Various Luneburg-lens geometries are used in the microwaves industry as radar reflectors and omnidirectional antennas. Here, we implement a two-dimensional Luneburg lens for the THz frequency region using a waveguide-based artificial-dielectric technology. The cylindrical device has a parabolic shaped top surface and a flat bottom surface. The substrate material of the lens is ultra-pure Teflon, with the top and bottom surfaces coated with high-conductivity silver paint to form a quasi-parallel-plate waveguide. Our experimental results show that the lens can focus an approximately 2-cm diameter input beam to a spot size of 3.4 mm at the diametrically opposite edge, at an operating frequency of 0.162 THz. This work demonstrates the versatility of this artificial-dielectric technology to design and fabricate inhomogeneous, gradient-index devices for the THz region.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasith Amarasinghe, Daniel M. Mittleman, and Rajind Mendis "A Luneburg lens for the THz region (Conference Presentation)", Proc. SPIE 10983, Next-Generation Spectroscopic Technologies XII, 1098316 (14 May 2019); https://doi.org/10.1117/12.2520476
Advertisement
Advertisement
KEYWORDS
Terahertz radiation

Waveguides

Antennas

Microwave radiation

Radar

Reflectors

Silver

Back to Top