Paper
5 November 2020 The comparison of two kinds of InSb etching technology
Author Affiliations +
Proceedings Volume 11563, AOPC 2020: Infrared Device and Infrared Technology; 115630G (2020) https://doi.org/10.1117/12.2579755
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
With the development of InSb infrared focal plane array (IRFPA) detectors, the scale of the detector array is growing larger, the size of the pixel and the space between pixels are becoming smaller. To realize the fabrication of high quality mesa-structure device, the paper focuses on the study of inductively coupled plasma ( ICP) dry etching technology using etching gas system based on methane and chlorine to realize mesa etching of InSb material. The paper compares the etching principle of two etching gas systems as CH4/H2/Ar and BCl3/Ar. Etching results such as etching morphology, etching rate, etching surface stoichiometric ratio and I-V test are compared. Through the research, BCl3/Ar gas system is found faster in etching rate. Etching with both kind of gas systems can result in smooth etching surface, normal stoichiometric ratio and qualified I-V test result which satisfy technological requirements.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hai-yan Li and Zhen Tan "The comparison of two kinds of InSb etching technology", Proc. SPIE 11563, AOPC 2020: Infrared Device and Infrared Technology, 115630G (5 November 2020); https://doi.org/10.1117/12.2579755
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Wet etching

Plasma etching

Sensors

Dry etching

Antimony

Chlorine

Back to Top