Study on the effect of spike-aerodome model of slotted drainage on drag reduction and heat protection of hypersonic blunt body

Zijian Ni; Shuzhou Fang; Jian Guo; Ziyu Wang; Yang Xu

doi:10.1117/12.2639210

20 September 2022 Study on the effect of spike-aerodome model of slotted drainage on drag reduction and heat protection of hypersonic blunt body

Zijian Ni, Shuzhou Fang, Jian Guo, Ziyu Wang, Yang Xu

Author Affiliations +

Proceedings Volume 12261, International Conference on Mechanical Design and Simulation (MDS 2022); 1226148 (2022) https://doi.org/10.1117/12.2639210
Event: Second International Conference on Mechanical Design and Simulation (MDS 2022), 2022, Wuhan, China

Abstract

Huge aerodynamic drag and severe aerodynamic heating are inevitable challenges for hypersonic vehicles. A novel drag reduction and thermal protection strategy based on the combination of spike-disk and channel is proposed. The hypersonic flow characteristics are studied numerically. The results show this new strategy further reduces the total resistance; but also provides good thermal protection. On this basis, the influence of the outlet angle of the nozzle on the flow characteristics and the performance of drag reduction and heat prevention is studied deeply. By decreasing the nozzle outlet angle and then increasing the number of nozzles, the resistance coefficient further decreases, while the Stanton number of the blunt-body decreases at first and then increases. In the range of research parameters, when the nozzle inlet angle is 60 °and the outlet angle is 15 °, compared with the single spike-disk model, the resistance coefficient of the Cd model is reduced by 26.7% and the Stanton number is reduced by 41.7%. The research results verify the feasibility of the new model's performance.

Citation Download Citation

Zijian Ni, Shuzhou Fang, Jian Guo, Ziyu Wang, and Yang Xu "Study on the effect of spike-aerodome model of slotted drainage on drag reduction and heat protection of hypersonic blunt body", Proc. SPIE 12261, International Conference on Mechanical Design and Simulation (MDS 2022), 1226148 (20 September 2022); https://doi.org/10.1117/12.2639210

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available