Paper
1 April 1991 Measurement of triggering instabilities of Imacon 500 streak cameras
David John Bowley, Philip Rickett, A. V. Babushkin, Nikolai S. Vorobiev, Alexander M. Prokhorov, Mikhail Ya. Schelev
Author Affiliations +
Proceedings Volume 1358, 19th Intl Congress on High-Speed Photography and Photonics; (1991) https://doi.org/10.1117/12.24054
Event: 19th International Congress on High-Speed Photography and Photonics, 1990, Cambridge, United Kingdom
Abstract
5±lps, spectrally limited optical pulses with less than 0.5% energy instability, generated by hybrid mode-locked, and passive feedback controled YA1O :Nd3 crystal laser were employed for measurements of Imacon 500 streak cameas triggering instabilities. These cameras have operated in streak mode with the streak speed of SxlO9cm/s. Synchronization signal was produced with the help of a standard avalanche photodiode. Due to very high stability of the utilized picosecond laser pulses, it was possible to measure with few picosecond accuracy the jitter variation of Imacon 500 cameras. It was found that for some of them, the triggering jitter does not exceed lOps RMS. In the present communication we will discuss jitter dependence on triggering pulse amplitude, as well as on the mains voltage variations.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David John Bowley, Philip Rickett, A. V. Babushkin, Nikolai S. Vorobiev, Alexander M. Prokhorov, and Mikhail Ya. Schelev "Measurement of triggering instabilities of Imacon 500 streak cameras", Proc. SPIE 1358, 19th Intl Congress on High-Speed Photography and Photonics, (1 April 1991); https://doi.org/10.1117/12.24054
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Streak cameras

Cameras

Laser crystals

Picosecond phenomena

Avalanche photodiodes

Crystals

Feedback control

Back to Top