Paper
4 May 1993 New surface modifications of polymer films with the excimer laser radiation
Sylvain Lazare, Pascale Benet, Matthias Bolle, Philipe De Donato, Eric Bernardy
Author Affiliations +
Proceedings Volume 1810, 9th International Symposium on Gas Flow and Chemical Lasers; (1993) https://doi.org/10.1117/12.144545
Event: Ninth International Symposium on Gas Flow and Chemical Lasers, 1992, Heraklion, Greece
Abstract
Laser surface texturing of polymer films is of interest for the improvement of the tribological and adhesion properties of these films. The absorption of a UV laser pulse of high energy causes ablation and a simultaneous surface roughening may appear. For pulse energies approaching the ablation threshold semi-crystalline polymers are superficially amorphized over a depth that is controlled by the experimental conditions. In a new regime of irradiation that uses a polarized excimer laser beam of low fluence periodic modifications of submicron size aligned parallel to the electric field are formed on nominally smooth surfaces. These self- developing structures result from the interference of the incident and surface scattered waves. Various applications are anticipated owing to the high dose efficiency and controllability of the process.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sylvain Lazare, Pascale Benet, Matthias Bolle, Philipe De Donato, and Eric Bernardy "New surface modifications of polymer films with the excimer laser radiation", Proc. SPIE 1810, 9th International Symposium on Gas Flow and Chemical Lasers, (4 May 1993); https://doi.org/10.1117/12.144545
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Laser induced plasma spectroscopy

Laser ablation

Excimer lasers

Polymer thin films

Chemical lasers

Laser damage threshold

RELATED CONTENT


Back to Top