Paper
5 May 1995 Strain mapping using piezoelectric sensors for damping treatment applications
Douglas A. Henderson
Author Affiliations +
Abstract
A concept for measuring dynamic strain distributions on structural surfaces is presented. The concept uses an array of small piezoelectric polymer film -- polyvinylidene fluoride (PVDF) -- strain sensors coupled with an inexpensive multi-channel signal processor to produce strain `maps.' The strain `maps' are intended to aid the placement of damping treatments. The current approach is to measure displacement mode shapes, measurement of the strain shapes is a more direct approach. As the structure bends, the PVDF sensor produces a voltage proportional to the dynamic strain over the effective surface area. The concept was first applied to an aluminum beam. An array of PVDF sensors was bonded to the surface of the beam to produce strain `maps' for the first three vibration modes. The resonant frequencies, damping, and strain `maps' were identified from captured transient time domain responses of the beam using the Eigensystem Realization Algorithm and compared to the parameters predicted by a finite element model. This paper compares the experimental and analytical strain `maps' of the beam and discusses the techniques required to conduct the experiment. Results presented in the paper show reasonably accurate strain `maps' which allowed the modal strain to be directly measured.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Douglas A. Henderson "Strain mapping using piezoelectric sensors for damping treatment applications", Proc. SPIE 2445, Smart Structures and Materials 1995: Passive Damping, (5 May 1995); https://doi.org/10.1117/12.208910
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Ferroelectric polymers

Finite element methods

Aluminum

Signal processing

Adhesives

Beam shaping

Back to Top