Control and uniformity of 280-nm features in i-line lithography using optical proximity corrections and off-axis illumination

Pat G. Watson; Joseph G. Garofalo; M. Hansen; Ilya M. Grodnensky; Ludwik J. Zych; R. Takahashi; Willie J. Yarbrough; Edward Ehrlacher; A. Reim; R. M. Vella; A. Dunbar; Albert Colina; B. Herrero; D. Castro

doi:10.1117/12.275997

7 July 1997 Control and uniformity of 280-nm features in i-line lithography using optical proximity corrections and off-axis illumination

Pat G. Watson, Joseph G. Garofalo, M. Hansen, Ilya M. Grodnensky, Ludwik J. Zych, R. Takahashi, Willie J. Yarbrough, Edward Ehrlacher, A. Reim, R. M. Vella, A. Dunbar, Albert Colina, B. Herrero, D. Castro

Author Affiliations +

Proceedings Volume 3051, Optical Microlithography X; (1997) https://doi.org/10.1117/12.275997
Event: Microlithography '97, 1997, Santa Clara, CA, United States

Abstract

The feasibility of manufacturing 280 nm gates for ASIC technology using i-line lithography is examined. Off-axis illumination, sub-resolution assist features and proximity effect bias corrections were considered. The experiments were performed with a reticle designed to evaluate the effects of line pitch, bias and field uniformity on the feature dimensions. Results show that dense and isolated features were found to print at about the same linewidth under all three illumination conditions. However, deviations as large as 40 nm were found at intermediate pitches, implying that some form of optical proximity correction is needed to maintain critical dimension (CD) control for a mask pattern with varying feature densities. Sub-resolution assist lines adjacent to isolated 280 nm lines significantly improved the apparent wall angle of the features compared to true isolated features. The use of these features comes at a cost; the sub-resolution features can be printed under certain conditions and could possibly lead to device failure. Multi-dimensional matrices of CD measurements with varying dose, focus, bias and pitch, when displayed in an appropriate manner, are being used to identify the relative advantages of different illumination conditions. Off-axis illumination offers a large depth of focus for all pitches if proximity effect biasing is applied. Conventional illumination with biasing can improve exposure latitude.

Citation Download Citation

Pat G. Watson, Joseph G. Garofalo, M. Hansen, Ilya M. Grodnensky, Ludwik J. Zych, R. Takahashi, Willie J. Yarbrough, Edward Ehrlacher, A. Reim, R. M. Vella, A. Dunbar, Albert Colina, B. Herrero, and D. Castro "Control and uniformity of 280-nm features in i-line lithography using optical proximity corrections and off-axis illumination", Proc. SPIE 3051, Optical Microlithography X, (7 July 1997); https://doi.org/10.1117/12.275997

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available