Paper
25 August 1997 New method for end-point detection in reactive ion etching of polysilicon
Author Affiliations +
Abstract
Reactive ion etching (RIE) is commonly used, as a process tool, for the etching of polysilicon, silicon dioxide, silicon nitride and other thin film deposits. One of the key requirements of the etching process is the accurate end-point detection of the process. There exist a number of process monitoring techniques for end-point detection, these however are costly to install and maintain. In response to this requirement, a new method for end-point detection of polysilicon topography etching in single wafer plasma reactive ion etcher is presented here, which incurs no added costs. The method is based upon experimental results correlating polysilicon etching end-point with the increase in the cathodic self-bias voltage developed across the substrate. It is shown that the end-point of polysilicon topography etching can be found by monitoring the first derivative of the self- bias voltage with time. Using this method it has been demonstrated that accurate end-point detection of polysilicon etching can be obtained with a residue free field, near- vertical polysilicon profile and critical dimension loss of less than 0.05 micrometer.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shahid Aslam, Naresh C. Das, and Peter K. Shu "New method for end-point detection in reactive ion etching of polysilicon", Proc. SPIE 3213, Process, Equipment, and Materials Control in Integrated Circuit Manufacturing III, (25 August 1997); https://doi.org/10.1117/12.284623
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Semiconducting wafers

Reactive ion etching

Plasma

Ions

Oxides

Ellipsometry

RELATED CONTENT

Patterning in the era of atomic scale fidelity
Proceedings of SPIE (March 17 2015)
Etch tailoring through flexible end-point detection
Proceedings of SPIE (March 01 1991)
Reactive Ion Etching Of Silicon Dioxide
Proceedings of SPIE (September 17 1987)
Developments in Si and SiO2 etching for MEMS based optical...
Proceedings of SPIE (December 29 2003)

Back to Top