Paper
20 July 1998 Development of a low-cost x-ray mask for high-aspect-ratio MEM smart structures
Pratul K. Ajmera, Stefan Stadler, Neda Abdollahi
Author Affiliations +
Abstract
A cost-effective process with short fabrication time for making x-ray masks for research and development purposes is described here for fabricating high-aspect ratio microelectromechanical structures using synchrotron based x- ray lithography. Microscope cover glass slides as membrane material is described. Slides with an initial thickness of 175 micrometers are etched to a thickness in the range of 10 - 25 micrometers using a diluted HF and buffered hydrofluoric acid solutions. The thinned slides are glued on supportive mask frames and sputtered with a chromium/silver sandwich layer which acts as a plating base layer for the deposition of the gold absorber. The judicial choice of glue and mask frame material are significant parameters in a successful fabrication process. Gold absorber structures are electroplated on the membrane. Calculations are done for contrast and dose ratio obtained in the photoresist after synchrotron radiation as a function of the mask design parameters. Exposure experiments are performed to prove the applicability of the fabricated x-ray mask.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pratul K. Ajmera, Stefan Stadler, and Neda Abdollahi "Development of a low-cost x-ray mask for high-aspect-ratio MEM smart structures", Proc. SPIE 3328, Smart Structures and Materials 1998: Smart Electronics and MEMS, (20 July 1998); https://doi.org/10.1117/12.320168
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

X-rays

Gold

Glasses

Plating

Polymethylmethacrylate

Etching

RELATED CONTENT


Back to Top