Paper
7 June 2000 Fabrication of electroactive polymer actuator composed of polypyrrole and solid-polymer electrolyte and its application to micropump
Seung-Ki Lee, Young Choi, WooYoung Sim, Sang Sik Yang, HoJung An, James Jungho Pak
Author Affiliations +
Abstract
Mechanical performances of beam-shaped and bridge-shaped conductive polymer actuator in aqueous solution and in solid electrolyte have been measured and analyzed varying polymerization conditions and operating conditions. The optimum thickness of polypyrrole for the best bending performance is about 17-19 μm which has been polymerized at the current density of 5.4 μA/mm2 for 120 minutes. For the application of conductive polymer actuator to micropump, silicon bulk micromachining process has been combined with polymer processes. By use of parylene diaphragm and anisotropic etching of silicon, the micropump structure composed of polypyrrole and solid polymer electrolyte has been fabricated successfully.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seung-Ki Lee, Young Choi, WooYoung Sim, Sang Sik Yang, HoJung An, and James Jungho Pak "Fabrication of electroactive polymer actuator composed of polypyrrole and solid-polymer electrolyte and its application to micropump", Proc. SPIE 3987, Smart Structures and Materials 2000: Electroactive Polymer Actuators and Devices (EAPAD), (7 June 2000); https://doi.org/10.1117/12.387787
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Actuators

Solids

Polymerization

Polymeric actuators

Silicon

Ions

Back to Top