Paper
24 October 2000 Ultra-Precision Linear Actuator for optical systems
Author Affiliations +
Abstract
The Ultra-Precision Linear Actuator presented in this paper was developed for the Next Generation Space Telescopes' (NGST) primary mirror surface figure control. The development was a joint effort between Alson E. Hatheway, Inc (AEH) and Moog, Schaeffer Magnetics Division (SMD). The goal of this project was to demonstrate an extremely light weight, relatively high stiffness actuator capable of operating uniformly well over the range of 20°K to 300°K and achieving diffraction-limited performance (±10 nm) in the optical band for weeks at a time, while consuming no electrical power and dissipating no heat. The essence of the design challenge was to develop a lightweight, high stiffness, low power, thermally stable linear positioning mechanism. Actuation systems with resolutions comparable to that of this design normally are operated in a closed-loop control system to compensate for any non-linearities and hysteresis inherent in their enabling technologies, such as piezoelectric and magnetostrictive transducers. These technologies require continuous application of power and therefore are not low power consumption devices. The development challenge was met through the use of Alson E. Hatheway's (AEH) patented Rubicontm elastic transducer which consists of two elastic elements; a soft spring and a stiff flexural member. Deflection of the soft spring applies a force input to the stiff flexure, which responds with a proportionally reduced output deflection. To maintain linearity, the displacements, and hence the stresses, developed in both elastic members are kept well below the elastic yield strength of the material. The AEH transducer is inherently linear and hysteresis free.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruben Nalbandian "Ultra-Precision Linear Actuator for optical systems", Proc. SPIE 4093, Current Developments in Lens Design and Optical Systems Engineering, (24 October 2000); https://doi.org/10.1117/12.405201
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Transducers

Cryogenics

Temperature metrology

Control systems design

Manufacturing

Titanium

Back to Top