Equivalent multilayer bandwidth and comparison between 13.4 nm and 14.4 nm for EUV throughput calculation

Weilun Chao; Eric M. Gullikson; David T. Attwood Jr.

doi:10.1117/12.436637

20 August 2001 Equivalent multilayer bandwidth and comparison between 13.4 nm and 14.4 nm for EUV throughput calculation

Weilun Chao, Eric M. Gullikson, David T. Attwood Jr.

Author Affiliations +

Proceedings Volume 4343, Emerging Lithographic Technologies V; (2001) https://doi.org/10.1117/12.436637
Event: 26th Annual International Symposium on Microlithography, 2001, Santa Clara, CA, United States

Abstract

In the calculation of wafer throughput for EUV production tools, the multilayer mirrors are often approximated as a pass-band with a flat response equal to the highest reflectivity of the mirrors and a bandwidth equal to the FWHM of the reflectivity curve. However, the actual reflectivity response of the mirrors is an extended curve which peaks at wavelengths typically between 11-15 nm. With a broadband source, photons with wavelength outside the FWHM of the mirror are also reflected, contributing to the throughput of the multimirror optical system. We present calculations to compare this simple model with the actual reflectivity curve for Mo/Si mirrors, The result shows that the model is a good approximation for throughput calculations. In this paper, the optimal parameter values and center wavelengths for maximum throughput were also calculated for Mo/Si mirrors at different incidence angles and (sigma) values. The simulation results confirm that for near-normal incidence, the optimal center wavelength for maximum integrated reflectivity is around 14.4 nm, in agreement with the previous work by R. Stuik et. al. As the off-normal incidence angle ((phi) ) increases, the integrated reflectivity is reduced faster at longer wavelengths. The maximum integrated reflectivity centered at 13.4 nm is closer to that at the optimal center wavelengths for larger value of (phi) . The effect is more distinct for smaller (sigma) . For (phi) equal to 15 degree(s) (NA ~ 0.25) and peak reflectivity of 70%, the maximum integrated reflectivity of a 9-mirror optical system at 13.4 nm is only 2% less than that at 14.4 nm. If a 2-nm thick SiO₂ capping layer with roughness of 0.2 nm is included in the simulation, the optimal wavelength is unaffected and only the integrated reflectivity is reduced.

Citation Download Citation

Weilun Chao, Eric M. Gullikson, and David T. Attwood Jr. "Equivalent multilayer bandwidth and comparison between 13.4 nm and 14.4 nm for EUV throughput calculation", Proc. SPIE 4343, Emerging Lithographic Technologies V, (20 August 2001); https://doi.org/10.1117/12.436637

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available