Paper
9 April 2001 Establishment of production processes and assurance method for alternating phase shift masks
Shiaki M. Murai, Yasuhiro Koizumi, Tatsuhiko Kamibayashi, Hidetaka Saitou, Morihisa Hoga, Yasutaka Morikawa, Hiroyuki Miyashita
Author Affiliations +
Proceedings Volume 4349, 17th European Conference on Mask Technology for Integrated Circuits and Microcomponents; (2001) https://doi.org/10.1117/12.425096
Event: 17th European Conference on Mask Technology for Integrated Circuits and Microcomponents, 2000, Munich, Germany
Abstract
Alternating phase shift masks (AItPSMs) are effective in reducing MEF. However, AItPSMs have been used in device development, not in production, because phase-defect assurance has not been sufficient. An assurance method for 180- and 150-nm rule A1tPSMs was established by the use of both MD-2000 and KLA/STARlight. We have started production of defect-free AItPSMs with quartz etched shifters and single trench structure s by a two-step quartz etching process, which has an advantage of low phase-defect density.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shiaki M. Murai, Yasuhiro Koizumi, Tatsuhiko Kamibayashi, Hidetaka Saitou, Morihisa Hoga, Yasutaka Morikawa, and Hiroyuki Miyashita "Establishment of production processes and assurance method for alternating phase shift masks", Proc. SPIE 4349, 17th European Conference on Mask Technology for Integrated Circuits and Microcomponents, (9 April 2001); https://doi.org/10.1117/12.425096
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Etching

Scanning electron microscopy

Quartz

Inspection

Photography

Phase shifts

Back to Top