Paper
28 September 2001 Experimental investigation of flow and heat transfer characteristics of R-134a in microchannels
Hisham E. Hegab, Abdullahel Bari, Timothy A. Ameel
Author Affiliations +
Proceedings Volume 4560, Microfluidics and BioMEMS; (2001) https://doi.org/10.1117/12.443049
Event: Micromachining and Microfabrication, 2001, San Francisco, CA, United States
Abstract
Fluid flow and heat transfer characteristics of single-phase flows in microchannels for refrigerant R-134a were experimentally investigated. Experiments were conducted using rectangular channels micro-milled in aluminum with hydraulic diameters ranging from approximately 112-mm to 210-mm and aspect ratios that varied from 1.0 to 1.5. Using overall temperature, flow rate, and pressure drop measurements, friction factors and convective heat transfer coefficients were experimentally determined for steady flow conditions. Reynolds number, relative roughness, and channel aspect ratio were the parameters examined in predicting friction factor and Nusselt number for the experiments. Experiment results indicated transition from laminar to turbulent flow occurred between a Reynolds number of 2,000-4,000. Friction factor results were consistently lower than values predicted by macroscale correlations. Nusselt number results indicated channel size may suppress turbulent convective heat transfer. Results also indicate that surface roughness may affect heat transfer characteristics in the turbulent regime.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hisham E. Hegab, Abdullahel Bari, and Timothy A. Ameel "Experimental investigation of flow and heat transfer characteristics of R-134a in microchannels", Proc. SPIE 4560, Microfluidics and BioMEMS, (28 September 2001); https://doi.org/10.1117/12.443049
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microfluidics

Aluminum

Temperature metrology

Surface roughness

Adhesives

Convection

Glasses

Back to Top