High-efficiency laser resonators for high-brightness beam generation with application to micromaterial processing and nonlinear processes

Thomas C. Sidler

doi:10.1117/12.469478

6 June 2002 High-efficiency laser resonators for high-brightness beam-generation with application to micromaterial processing and nonlinear processes

Thomas C. Sidler

Author Affiliations +

Proceedings Volume 4629, Laser Resonators and Beam Control V; (2002) https://doi.org/10.1117/12.469478
Event: High-Power Lasers and Applications, 2002, San Jose, California, United States

Abstract

Industrial high precision micro-material processing with solid-state lasers needs the reliable and efficient generation of high brightness laser beams. The key problems for this goal are the control of the thermal effects (lensing) in the active material and the overlap efficiency between the resonator mode and the pumped active material volume. Modern solid state lasers with low thermal effects such as zig-zag slab lasers have non circular geometries difficult to adapt for high efficiency and brightness simultaneously. Resonators comprising a cylindrical telescope, resulting in an elliptical beam section in the active material of rectangular geometry but nevertheless a circularly symmetric output beam can increase the efficiency and beam quality and also compensate for eventual astigmatic effects of the active medium. These lasers yield therefore TEM00 output beams (pulsed, free running) with a beam quality of M²<1.7, pulse powers up to several kW and intensities up to 500MW/cm² for a spot diameter of 10 to 15micrometers . Such lasers are ideally suited for industrial high precision cutting and drilling, but also for quasi-cw harmonic generation, where the beam quality influences directly the conversion efficiency via the limited angular phase matching acceptance angles. Laser cutting with fundamental mode Nd-YAG lasers at 1.06micrometers and at 532nm (SHG efficiencies up to 17%) yields a minimal kerf width down to 15 micrometers and heat affected zones of less than 2micrometers .

Citation Download Citation

Thomas C. Sidler "High-efficiency laser resonators for high-brightness beam-generation with application to micromaterial processing and nonlinear processes", Proc. SPIE 4629, Laser Resonators and Beam Control V, (6 June 2002); https://doi.org/10.1117/12.469478

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available