Evaluation of a transmission CD-SEM for EB stencil masks

Mikio Ishikawa; Hiroshi Fujita; Morihisa Hoga; Hisatake Sano

doi:10.1117/12.504237

28 August 2003 Evaluation of a transmission CD-SEM for EB stencil masks

Mikio Ishikawa, Hiroshi Fujita, Morihisa Hoga, Hisatake Sano

Proceedings Volume 5130, Photomask and Next-Generation Lithography Mask Technology X; (2003) https://doi.org/10.1117/12.504237
Event: Photomask and Next Generation Lithography Mask Technology X, 2003, Yokohama, Japan

Abstract

Scanning-electron microscopes designed for critical dimension (CD) measurement (CD-SEMs), which operate in a reflection mode, are commonly used in photomask quality assurance. However, such CD-SEMs are not always suitable for CD measurement of electron beam (EB) stencil masks such as electron-beam projection lithography (EPL) masks and low-energy electron-beam proximity projection lithography (LEEPL) masks. A dual-mode CD-SEM, which can operate in a transmission mode besides in a reflection mode, was recently developed by HOLON. The performance of the tool will be reported. Two EPL test masks with a 2-μm-thick Si scatterer and one LEEPL test mask with about 1-μm-thick absorber were prepared. The EPL masks have 1:1 lines-and-spaces (L&S) patterns and isolated spaces, all varying from 200 to 1000 nm in designed size. The LEEPL mask has 1:1 L&S patterns ranging from 80 to 550 nm. The masks were observed at an acceleration voltage of 5.5 kV with no bias voltage and a current of 10 pA. The dual-mode CD-SEM is found to have the following characters: (1) short-term repeatability and long-term repeatability less than 2 nm in both modes, (2) compatibility with a photomask CD-SEM in the reflection mode, (3) coincidence of the CDs measured in the transmission mode from the front side and back side within 3.0 nm for stencil patterns with a sidewall angle larger than 89.8 deg, and (4) capability of measurement at least down to 80 nm. Therefore we conclude that the dual-mode CD-SEM is applicable for measurement of CDs of EB stencil masks.

Citation Download Citation

Mikio Ishikawa, Hiroshi Fujita, Morihisa Hoga, and Hisatake Sano "Evaluation of a transmission CD-SEM for EB stencil masks", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); https://doi.org/10.1117/12.504237

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available