Paper
17 December 2003 Porous silica pellicle frame
De-Yin Jeng, D. Laurence Meixner, Rahul Ganguli, Steven G. Colbern, Troy Robinson, Mark W. Morris, S. Ray Chaudhuri, Brian J. Grenon
Author Affiliations +
Abstract
Two main issues with current pellicle frames are: (1) thermal expansion mismatch between the anodized aluminum frame and the photomask, and (2) the lack of porosity for purging and contamination control. Both issues can be addressed by using a sol-gel-derived porous silica frame. The silica frame has essentially the same thermal expansion coefficient as the fused silica photomask substrate. The porous nature of the silica frame provides contamination control by N2 purging and scavenging capability. The porosity characteristics and mechanical properties of the frame material were determined. Porous silica frame was successfully mounted onto quartz plate by a commercial process, suggesting the suitability of using porous silica as pellicle frame material. The sol-gel derived porous silica represents the first proof-of-concept for an alternative frame material with a potentially significant impact on the photomask industry.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
De-Yin Jeng, D. Laurence Meixner, Rahul Ganguli, Steven G. Colbern, Troy Robinson, Mark W. Morris, S. Ray Chaudhuri, and Brian J. Grenon "Porous silica pellicle frame", Proc. SPIE 5256, 23rd Annual BACUS Symposium on Photomask Technology, (17 December 2003); https://doi.org/10.1117/12.518562
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Pellicles

Photomasks

Adsorption

Sol-gels

Aluminum

Bioalcohols

RELATED CONTENT

Porous silica frame for deep UV lithography
Proceedings of SPIE (June 26 2003)
Porous silica frame for deep-UV lithography
Proceedings of SPIE (December 27 2002)
Formation of a xerogel in reduced gravity using the acid...
Proceedings of SPIE (January 19 2006)
Hard pellicle study for 157-nm lithography
Proceedings of SPIE (August 01 2002)

Back to Top