Fabrication and characterization of ohmic contacting RF MEMS switches

Christopher W. Dyck; Thomas A. Plut; Christopher D. Nordquist; Patrick S. Finnegan; Franklin Austin; Isak C. Reines; Chuck Goldsmith

doi:10.1117/12.527984

24 January 2004 Fabrication and characterization of ohmic contacting RF MEMS switches

Christopher W. Dyck, Thomas A. Plut, Christopher D. Nordquist, Patrick S. Finnegan, Franklin Austin, Isak C. Reines, Chuck Goldsmith

Author Affiliations +

Proceedings Volume 5344, MEMS/MOEMS Components and Their Applications; (2004) https://doi.org/10.1117/12.527984
Event: Micromachining and Microfabrication, 2004, San Jose, California, United States

Abstract

We have fabricated and characterized radio frequency microelectromechanical systems (RF MEMS) ohmic switches for applications in discrete tunable filters and phase shifters over a frequency range of 0 to 20 GHz. Our previously reported cantilever switches have been redesigned for higher isolation and are now achieving 22 dB of isolation at 10 GHz. The measured insertion loss is 0.15 dB at 10 GHz. We have also fabricated and characterized new devices, designated “crab” switches, to increase isolation and contact forces relative to the cantilever design. The measured insertion loss and isolation are 0.1 dB per switch at 20 GHz and 22 dB at 10 GHz, respectively. A simple and accurate equivalent model has been developed, consisting of a transmission line segment and either a series capacitor to represent the blocking state or a series resistor to represent the passing state. Experimental analysis of the switch shows that high contact and substrate capacitive coupling degrades the isolation performance. Simulations indicate that the isolation improves to 30 dB at 10 GHz by reducing these capacitances. The crab switch design has a measured contact force of 120 μN, which represents a factor of four increase over the cantilever switch contact force and results in consistent, low-loss performance.

Citation Download Citation

Christopher W. Dyck, Thomas A. Plut, Christopher D. Nordquist, Patrick S. Finnegan, Franklin Austin, Isak C. Reines, and Chuck Goldsmith "Fabrication and characterization of ohmic contacting RF MEMS switches", Proc. SPIE 5344, MEMS/MOEMS Components and Their Applications, (24 January 2004); https://doi.org/10.1117/12.527984

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available