Paper
24 January 2004 Low-stressed high-aspect-ratio ultrathick SU-8 UV-LIGA process for the fabrication of a micro heat exchanger
Author Affiliations +
Abstract
SU-8 is an ultra-thick negative photoresist with low optical absorption in the near UV range, which makes it an ideal material for generating thick molds for electroforming as well as a structural material for MEMS devices. However, the MEMS fabrication of using SU-8 is largely limited by its well-known poor adhesion to metallic layers as well as the high internal stress induced after baking. In this paper, an optimized process for fabricating ultra-thick low stressed SU-8 mold is developed and good adhesion between SU-8 and metals is obtained by applying a newly developed material, Omnicoat from Microchem Inc. A laminated (sandwiched) micro heat exchanger has been fabricated using the developed process in which sandwiched microchannels (one layer of Ni and one layer of SU-8) has been fabricated using the patterned SU-8 and nickel electroforming process. Test results show that the micro structure fabricated can stand at cryo temperature (77K) without damages such as cracks or delamination.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bo Li and Quanfang Chen "Low-stressed high-aspect-ratio ultrathick SU-8 UV-LIGA process for the fabrication of a micro heat exchanger", Proc. SPIE 5344, MEMS/MOEMS Components and Their Applications, (24 January 2004); https://doi.org/10.1117/12.524608
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nickel

Coating

Microelectromechanical systems

Semiconducting wafers

Cryogenics

Near ultraviolet

Copper

Back to Top