Paper
29 December 2003 MEMS-based lithography for the fabrication of micro-optical components
Lars H. Erdmann, Arnaud Deparnay, Falk Wirth, Robert Brunner
Author Affiliations +
Abstract
We present a new method for the fabrication of diffractive and refractive microoptical components. The method is suitable for low-volume production, process development, high quality rapid prototyping of optical components and allows the fast experimental test of designs for a wide variety of different microoptical components e.g. computer generated holograms, blazed diffraction gratings or refrative microstructures. Our method is based on employing a computer-controlled digital-multi-micromirror device (DMD) as a switchable projection mask. The DMD is imaged into a photoresist layer using a Carl Zeiss lithography objective with a demagnification of 10:1 and a numerical aperture of 0.32 on the image side. The resulting pixel-size is 1.36 μm x 1.36μm. In comparison with laser direct writing with a single spot our method is a parallel processing of nearly 800000 pixels (1024 x 768).
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lars H. Erdmann, Arnaud Deparnay, Falk Wirth, and Robert Brunner "MEMS-based lithography for the fabrication of micro-optical components", Proc. SPIE 5347, Micromachining Technology for Micro-Optics and Nano-Optics II, (29 December 2003); https://doi.org/10.1117/12.524447
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Computer generated holography

Digital micromirror devices

Photomasks

Photoresist materials

Microelectromechanical systems

Micromirrors

RELATED CONTENT


Back to Top