Predicting microfluidic response during immersion lithography scanning

Alexander C. Wei; Gerald A. Dicks; Amr Y. Abdo; Gregory F. Nellis; Roxann L. Engelstad; Jaehyuk Chang; Edward G. Lovell; William A. Beckman

doi:10.1117/12.568024

2 June 2004 Predicting microfluidic response during immersion lithography scanning

Alexander C. Wei, Gerald A. Dicks, Amr Y. Abdo, Gregory F. Nellis, Roxann L. Engelstad, Jaehyuk Chang, Edward G. Lovell, William A. Beckman

Author Affiliations +

Proceedings Volume 5504, 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents; (2004) https://doi.org/10.1117/12.568024
Event: 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents, 2004, Dresden, Germany

Abstract

Immersion lithography has been proposed as a method of improving optical lithography resolution to 50 nm and below. The premise behind the concept is to increase the index of refraction in the space between the lens and wafer through the insertion of a high refractive index liquid in place of the low refractive index air that currently fills the gap. This paper presents three studies related to potential problem areas for immersion lithography. The first study investigates the entrainment of air as liquid flows over features in the wafer topology. Bubbles are undesirable because they introduce changes in the index of refraction in the optical path that can lead to imaging errors. The second investigation examines liquid heating due to the absorption of the incident energy by the fluid as well as heat transferred from the exposed wafer and viscous heating. This temperature elevation can lead to changes in the liquid's index of refraction which may lead to optical degradation of the fluid. The final investigation examines the potentially significant normal and shear stresses induced on both the lens and wafer surface due to the increased viscosity and density of the liquid as compared with air. These mechanical loads may cause the lens to distort or shift in its mounting. This paper presents the results of the numerical thermal, flow, and structural simulations used to analyze these various critical issues.

Citation Download Citation

Alexander C. Wei, Gerald A. Dicks, Amr Y. Abdo, Gregory F. Nellis, Roxann L. Engelstad, Jaehyuk Chang, Edward G. Lovell, and William A. Beckman "Predicting microfluidic response during immersion lithography scanning", Proc. SPIE 5504, 20th European Conference on Mask Technology for Integrated Circuits and Microcomponents, (2 June 2004); https://doi.org/10.1117/12.568024

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available