Paper
23 January 2006 Fabrication of integrated light guiding plate for backlight system
Author Affiliations +
Abstract
A traditional LCD backlight system is consist of light sources, a light guiding plate and prism sheets, diffusive sheets and reflective sheet. Following the development of the thin LCD, modify the backlight system which has already become the trend. The light guiding plate is very important element in backlight unit which is usually made of Polymethyl methacrylate (PMMA). Generally, the light guiding plates is fabricated by injection molding. MEMS and hot embossing technologies are applied to fabricate the integrated light guiding plate in this research. The micro-prisms, the micro pyramids and Al thin film are based on the integrated light guiding plate which is guiding light to the LCD panel evenly. So the backlight system will be simplified to use only one integrated light guiding plate without using any optical sheets. The light guiding plate can reduce three optical sheets in backlight, so it can save the space and lower the process cost. Non-prism LGPs and integrated LGPs are presented in this paper.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chao Heng Chien and Zhi Peng Chen "Fabrication of integrated light guiding plate for backlight system", Proc. SPIE 6109, Micromachining and Microfabrication Process Technology XI, 610909 (23 January 2006); https://doi.org/10.1117/12.647115
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LCDs

Light sources

Prisms

Integrated optics

Silicon

Polymethylmethacrylate

Aluminum

Back to Top