Paper
29 March 2006 Thickness dependence of the lithographic performance in 193nm photoresists
Jae Hyun Kim, Namuk Choi, Young-Ho Kim, Tae-Sung Kim
Author Affiliations +
Abstract
The lithographic performance of a 193nm resist was evaluated for 75nm line and space patterns with thicknesses ranging from 35 nm to 170 nm. Because of the high line edge roughness (LER) value and low depth of focus (DOF), the standard resist was not appropriate for sub-100nm thick films. The influence of the concentration of photo acid generator (PAG) on the lithographic performance-LER, depth of focus (DOF)- over the thickness range of 35nm to 110 nm will be investigated in this paper. With PAG loading percentage increased, the LER and DOF value were enhanced at sub-100nm thickness. Finally, It was demonstrated that the lithographic performance could be enhanced up to 50 nm thickness, changing the resist structure for less transparent type based on the high PAG loading resist.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jae Hyun Kim, Namuk Choi, Young-Ho Kim, and Tae-Sung Kim "Thickness dependence of the lithographic performance in 193nm photoresists", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 615337 (29 March 2006); https://doi.org/10.1117/12.655777
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line edge roughness

Lithography

193nm lithography

Scanning electron microscopy

Photoresist materials

Polymers

Optical lithography

Back to Top