Development of a short pulse and high average power CO2 laser for EUV lithography

Tatsuya Ariga

doi:10.1117/12.738798

26 April 2007 Development of a short pulse and high average power CO₂ laser for EUV lithography

Tatsuya Ariga

Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 634604 (2007) https://doi.org/10.1117/12.738798
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria

Abstract

EUV lithography (EUVL) is the candidate for next generation lithography to be introduced by the semiconductor industry to HVM (high volume manufacturing) in 2013. The power of the EUVL light source has to be at least 115W at a wavelength of 13.5nm. A laser produced plasma (LPP) is the main candidate for this light source but a cost effective laser driver is the key requirement for the realization of this concept. We are currently developing a high power and high repetition rate CO₂ laser system to achieve 50 W intermediate focus EUV power with a Tin droplet target. A high conversion efficiency (CE) from laser energy to EUV in-band energy is the most important issue for the concept to be realized. A CE of more than 2 % has been obtained with a Tin target and a CO₂ laser which is also predicted by numerical simulation analysis. The high CE requires a short laser pulse of less than 15 ns. This paper describes the development of a CO₂ laser system that is based on RF-excited, axial flow CO₂ laser amplifiers. The system produces a short pulse length about 15 ns and a nominal average power of several kW at a repetition rate of 100 kHz, An output power of 2.6 kW has been achieved with a pulse length between 15~30 ns at 130 kHz repetition rate at small signal amplification. The phase distortion of the laser beam after amplification is negligible and the beam can be focused to about 150&mgr;m diameter in 1/e². The conceptual design of the CO₂ laser system for LPP EUVL light source, and the laser performance are reported. The further increase of the amplification efficiency is discussed to obtain 5 kW average output power.

Citation Download Citation

Tatsuya Ariga "Development of a short pulse and high average power CO₂ laser for EUV lithography", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 634604 (26 April 2007); https://doi.org/10.1117/12.738798

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available