A cantilever-type electrostatic zipping actuator

Naresh Dhaubanjar; Smitha M. N. Rao; Ying Cai; Dan Popa; Mu Chiao; J.-C. Chiao

doi:10.1117/12.695959

8 January 2007 A cantilever-type electrostatic zipping actuator

Naresh Dhaubanjar, Smitha M. N. Rao, Ying Cai, Dan Popa, Mu Chiao, J.-C. Chiao

Proceedings Volume 6414, Smart Structures, Devices, and Systems III; 641421 (2007) https://doi.org/10.1117/12.695959
Event: SPIE Smart Materials, Nano- and Micro-Smart Systems, 2006, Adelaide, Australia

Abstract

This paper discussed modeling, design, fabrication and characterization of a new cantilever-type electrostatic zipping actuator. The actuator was designed to achieve high displacements and fabricated using multi-layer polysilicon foundry fabrication process PolyMUMPS. The high out-of-plane displacement is to satisfy the requirements in specific optical applications. In this paper we presented the design considerations in displacement, electrostatic forces and electrostatic stability. The electrostatic force between the curved cantilever and the bottom electrode on the substrate pulls the cantilever down. With a warped cantilever, the force closes the gap from the anchor end and gradually the zipping effect actuates the entire cantilever without increasing the biasing voltages. Previous electrostatic zipper actuators require a thin layer of dielectric material on top of the bottom electrode to prevent electrical shorting. They may have an issue with electrical breakdown of the thin dielectric layer due to the film quality. We designed a new mechanical structure to avoid the electrical shorting problem without a layer of dielectric material. Our analysis and experimental results demonstrated that the proposed design can withstand high voltages without shorting and is capable of high deflection. The vertical displacements of different device configurations were found ranging from 30.4μm to 450μm while the actuation voltages varied in the range from 12V to 45.3V for complete actuation. The pull-in voltages for various configurations were analyzed and presented.

Citation Download Citation

Naresh Dhaubanjar, Smitha M. N. Rao, Ying Cai, Dan Popa, Mu Chiao, and J.-C. Chiao "A cantilever-type electrostatic zipping actuator", Proc. SPIE 6414, Smart Structures, Devices, and Systems III, 641421 (8 January 2007); https://doi.org/10.1117/12.695959

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available