An adaptive control method for dielectric elastomer devices

Todd A. Gisby; Emilio P. Calius; Shane Xie; Iain A. Anderson

doi:10.1117/12.776503

10 April 2008 An adaptive control method for dielectric elastomer devices

Todd A. Gisby, Emilio P. Calius, Shane Xie, Iain A. Anderson

Proceedings Volume 6927, Electroactive Polymer Actuators and Devices (EAPAD) 2008; 69271C (2008) https://doi.org/10.1117/12.776503
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2008, San Diego, California, United States

Abstract

The future of Dielectric Elastomer Actuator (DEA) technology lies in miniaturizing individual elements and utilizing them in array configurations, thereby increasing system fault tolerance and reducing operating voltages. An important direction of DEA research therefore is real-time closed loop control of arrays of DEAs, particularly where multiple degrees-of-freedom are desirable. As the number of degrees-of-freedom increases a distributed control system offers a number of advantages with respect to speed and efficiency. A low bandwidth digital control method for DEA devices is presented in this paper. Pulse Width Modulation (PWM) is used as the basis for a current controlled DEA system that allows multiple degrees-of-freedom to be controlled independently and in parallel using a single power supply set to a fixed voltage. The amplitude and the duty cycle of the PWM signal control the current flow through a high speed, high voltage opto-coupler connected in series with a DEA, enabling continuous control of both the output displacement and speed. Controlling the current in real-time results in a system approaching a stable and robust constant charge system. Closed loop control is achieved by measuring the rate of change of the voltage across the DEA in response to a step change in the current input generated by the control signal. This enables the capacitance to be calculated, which in combination with the voltage difference between the electrodes and the initial dimensions, enables the charge, strain state and Maxwell pressure to be inferred. Future developments include integrating feedback information directly with the control signal, leaving the controller to coordinate rather than control individual degrees-of-freedom.

Citation Download Citation

Todd A. Gisby, Emilio P. Calius, Shane Xie, and Iain A. Anderson "An adaptive control method for dielectric elastomer devices", Proc. SPIE 6927, Electroactive Polymer Actuators and Devices (EAPAD) 2008, 69271C (10 April 2008); https://doi.org/10.1117/12.776503

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available