Fabrication of half-pitch 32-45-nm SRAM patterns with EUVL

Yuusuke Tanaka; Hajime Aoyama; Shunko Magoshi; Kazuo Tawarayama; Seiichiro Shirai; Hiroyuki Tanaka

doi:10.1117/12.813492

18 March 2009 Fabrication of half-pitch 32-45-nm SRAM patterns with EUVL

Yuusuke Tanaka, Hajime Aoyama, Shunko Magoshi, Kazuo Tawarayama, Seiichiro Shirai, Hiroyuki Tanaka

Proceedings Volume 7271, Alternative Lithographic Technologies; 72713S (2009) https://doi.org/10.1117/12.813492
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

Since the k1 factor is much larger in extreme-ultraviolet lithography (EUVL) than in optical lithography, optical proximity correction (OPC) should be much simpler for patterns on EUVL masks than for those on advanced photomasks. This will facilitate the fabrication of complex device patterns with EUVL. In this study, static random-access memory (SRAM) cell patterns for the half-pitch (hp) 32- and 45-nm nodes were fabricated using two EUV exposure tools (SFET, EUV1), and their fidelity was evaluated. The levels of SRAM patterns were isolation, gate, contact, and metal. The size of the SRAM unit cell was 0.191 μm² for the hp 45-nm and 0.097 μm² for the hp 32-nm patterns. Most of the experiments employed SSR2, a high-resolution EUV resist. The high performance of the SFET and SSR2 enabled hp 45-nm SRAM patterns to be fabricated faithfully. However, some of the hp 32-nm patterns deviated from the mask patterns. To determine the causes of this degradation, we made a simulation analysis using the Sentaurus Lithography simulator. The main cause of the degradation was found to be resist blur. When we used MET-2D resist, which has a relatively large resist blur, the degradation became quite severe. Although the resist blur for SSR2 is about 10 nm, it is not small enough for the hp 32-nm SRAM patterns, especially for the gate and metal levels. It is necessary to reduce resist blur to improve the fidelity for this pattern size. Simulation results indicated that resist blur should be reduced to about 5 nm for hp 22-nm node device patterns.

Citation Download Citation

Yuusuke Tanaka, Hajime Aoyama, Shunko Magoshi, Kazuo Tawarayama, Seiichiro Shirai, and Hiroyuki Tanaka "Fabrication of half-pitch 32-45-nm SRAM patterns with EUVL", Proc. SPIE 7271, Alternative Lithographic Technologies, 72713S (18 March 2009); https://doi.org/10.1117/12.813492

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available