Paper
7 April 2011 Out of band radiation effects on resist patterning
Simi A. George, Patrick P. Naulleau
Author Affiliations +
Abstract
Our previous work estimated the expected out-of-band (OOB) flare contribution at the wafer level assuming that there is a given amount of OOB at the collector focus. We found that the OOB effects are wavelength, resist, and pattern dependent. In this paper, results from rigorous patterning evaluation of multiple OOB-exposed resists using the SEMATECH Berkeley 0.3-NA MET are presented. A controlled amount of OOB is applied to the resist films before patterning is completed with the MET. LER and process performance above and at the resolution limit and at the resolution limits are evaluated and presented. The results typically show a negative impact on LER and process performance after the OOB exposures except in the case of one resist formulation, performance improvement was observed.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simi A. George and Patrick P. Naulleau "Out of band radiation effects on resist patterning", Proc. SPIE 7969, Extreme Ultraviolet (EUV) Lithography II, 796914 (7 April 2011); https://doi.org/10.1117/12.881161
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line edge roughness

Extreme ultraviolet

Optical lithography

Extreme ultraviolet lithography

Semiconducting wafers

Mirrors

Photomasks

RELATED CONTENT

Overview of extreme ultraviolet lithography
Proceedings of SPIE (December 07 1994)
Assessing out of band flare effects at the wafer level...
Proceedings of SPIE (March 22 2010)
Thorough characterization of an EUV mask
Proceedings of SPIE (May 11 2009)

Back to Top