Paper
29 March 2013 15nm HP patterning with EUV and SADP: key contributors for improvement of LWR, LER, and CDU
K. Xu, L. Souriau, D. Hellin, J. Versluijs, P. Wong, D. Vangoidsenhoven, N. Vandenbroeck, H. Dekkers, X. P. Shi, J. Albert, C. L. Tan, J. Vertommen, B. Coenegrachts, I. Orain, Y. Kimura, V. Wiaux, W. Boullart
Author Affiliations +
Abstract
This paper discusses the approach for patterning 15nm Half Pitch (HP) structures using EUV lithography combined with Self-Aligned Double Patterning (SADP). A stack composed of a double hard mask, which allows decoupling photoresist transfer and trim, and an α-Si mandrel, which offers better mechanical properties during the mandrel and spacer patterning, is proposed. A break-down study with the patterning steps was performed to investigate the key contributors for improvement of LWR, LER and CDU, targeting integrated solutions with lithography, etch, thin film deposition, and wet cleans for selected applications. Based on the optimization of these key patterning contributors, optimum LWR, LER and CDU at 15nm HP are demonstrated.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Xu, L. Souriau, D. Hellin, J. Versluijs, P. Wong, D. Vangoidsenhoven, N. Vandenbroeck, H. Dekkers, X. P. Shi, J. Albert, C. L. Tan, J. Vertommen, B. Coenegrachts, I. Orain, Y. Kimura, V. Wiaux, and W. Boullart "15nm HP patterning with EUV and SADP: key contributors for improvement of LWR, LER, and CDU", Proc. SPIE 8685, Advanced Etch Technology for Nanopatterning II, 86850C (29 March 2013); https://doi.org/10.1117/12.2011586
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line width roughness

Etching

Optical lithography

Line edge roughness

Photomasks

Extreme ultraviolet lithography

Photoresist materials

RELATED CONTENT


Back to Top