Defect reduction and defect stability in IMEC's 14nm half-pitch chemo-epitaxy DSA flow

Roel Gronheid; Paulina Rincon Delgadillo; Hari Pathangi; Dieter Van den Heuvel; Doni Parnell; Boon Teik Chan; Yu-Tsung Lee; Lieve Van Look; Yi Cao; YoungJun Her; Guanyang Lin; Ryota Harukawa; Venkat Nagaswami; Lucia D'Urzo; Mark Somervell; Paul Nealey

doi:10.1117/12.2047265

28 March 2014 Defect reduction and defect stability in IMEC's 14nm half-pitch chemo-epitaxy DSA flow

Roel Gronheid, Paulina Rincon Delgadillo, Hari Pathangi, Dieter Van den Heuvel, Doni Parnell, Boon Teik Chan, Yu-Tsung Lee, Lieve Van Look, Yi Cao, YoungJun Her, Guanyang Lin, Ryota Harukawa, Venkat Nagaswami, Lucia D'Urzo, Mark Somervell, Paul Nealey

Author Affiliations +

Proceedings Volume 9049, Alternative Lithographic Technologies VI; 904905 (2014) https://doi.org/10.1117/12.2047265
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

Directed Self-Assembly (DSA) of Block Co-Polymers (BCP) has become an intense field of study as a potential patterning solution for future generation devices. The most critical challenges that need to be understood and controlled include pattern placement accuracy, achieving low defectivity in DSA patterns and how to make chip designs DSA-friendly. The DSA program at imec includes efforts on these three major topics. Specifically, in this paper the progress in DSA defectivity within the imec program will be discussed. In previous work, defectivity levels of ~560 defects/cm² were reported and the root causes for these defects were identified, which included particle sources, material interactions and pre-pattern imperfections. The specific efforts that have been undertaken to reduce defectivity in the line/space chemoepitaxy DSA flow that is used for the imec defectivity studies are discussed. Specifically, control of neutral layer material and improved filtration during the block co-polymer manufacturing have enabled a significant reduction in the defect performance. In parallel, efforts have been ongoing to enhance the defect inspection capabilities and allow a high capture rate of the small defects. It is demonstrated that transfer of the polystyrene patterns into the underlying substrate is critical for detecting the DSA-relevant defect modes including microbridges and small dislocations. Such pattern transfer enhances the inspection sensitivity by ~10x. Further improvement through process optimization allows for substantial defectivity reduction.

Citation Download Citation

Roel Gronheid, Paulina Rincon Delgadillo, Hari Pathangi, Dieter Van den Heuvel, Doni Parnell, Boon Teik Chan, Yu-Tsung Lee, Lieve Van Look, Yi Cao, YoungJun Her, Guanyang Lin, Ryota Harukawa, Venkat Nagaswami, Lucia D'Urzo, Mark Somervell, and Paul Nealey "Defect reduction and defect stability in IMEC's 14nm half-pitch chemo-epitaxy DSA flow", Proc. SPIE 9049, Alternative Lithographic Technologies VI, 904905 (28 March 2014); https://doi.org/10.1117/12.2047265

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available