Paper
31 March 2014 A defocus measurement method for an in situ aberration measurement method using a phase-shift ring mask
Author Affiliations +
Abstract
An in situ aberration measurement method using a two dimensional (2D) phase-shift ring mask has been proposed for lithographic projection lenses, which is more accurate and faster than AMAI-PCA method. The defocus of the aerial image of the 2D measurement mask is the main source of the measurement error of this method. In this paper, a defocus measurement method for the aberration measurement method is proposed, in which the residual of the principal component analysis process is used as the criterion. After the defocus is accurately measured, the most suitable linear relationship model, which plays a very important role in the aberration measurement method, can be determined. Simulations with the lithography simulator Dr. LiTHO demonstrated that the accuracy of the defocus measurement method is approximately 1nm. The aberration measurement method can detect 12 Zernike aberrations (Z5~Z16) with maximum systematic error of approximately 1mλ, when the suitable linear relationship model is used.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sikun Li, Xiangzhao Wang, Jishuo Yang, Feng Tang, Guanyong Yan, and Andreas Erdmann "A defocus measurement method for an in situ aberration measurement method using a phase-shift ring mask", Proc. SPIE 9052, Optical Microlithography XXVII, 90521L (31 March 2014); https://doi.org/10.1117/12.2046649
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Image processing

Process modeling

In situ metrology

Lithography

Image retrieval

Principal component analysis

RELATED CONTENT


Back to Top