1 July 2003 Advanced inspection technique for deep-submicron and high-aspect-ratio contact holes
Miyako Matsui, Mari Nozoe, Keiko Arauchi, Atsuko Takafuji, Hidetoshi Nishiyama, Yasushi Goto
Author Affiliations +
Abstract
We developed a technique using electron beams for inspecting contact holes immediately after dry etching and detecting incomplete contact failures. Wafers with deep-submicron contact holes that had high aspect ratios of 10 could be detected during practical inspection time by controlling the charging effect on the wafer surfaces. Measurements of the energy distribution in the secondary electrons exhausted from the bottom of the holes indicated that they were accelerated by the charge-up voltage on the wafer surfaces. Our analysis showed that high-density electron beams must be used to charge the surfaces when the aspect ratio is high. The minimum thickness of the residual SiO2 that could be detected at the bottom of the contact holes was 2 nm using an aspect ratio of 8. Applying this mechanism to optimize the dry etching process in semiconductor manufacturing showed that we could achieve reliable process control.
©(2003) Society of Photo-Optical Instrumentation Engineers (SPIE)
Miyako Matsui, Mari Nozoe, Keiko Arauchi, Atsuko Takafuji, Hidetoshi Nishiyama, and Yasushi Goto "Advanced inspection technique for deep-submicron and high-aspect-ratio contact holes," Journal of Micro/Nanolithography, MEMS, and MOEMS 2(3), (1 July 2003). https://doi.org/10.1117/1.1585062
Published: 1 July 2003
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Semiconducting wafers

Electron beams

Dry etching

Scanning electron microscopy

Selenium

Silicon

Back to Top