Paper
1 November 1982 Fabrication Of An Optically Activated Transducer For Real-Time Diagnostic Imaging
Kung-Yen Su, Glen Wade
Author Affiliations +
Abstract
The opto-acoustic transducer (OAT), an essential element in a real-time acoustic imaging system, is a sandwich-type structure which consists of a planar transparent indium-tinoxide electrode, a sputter-deposited CdS photoconductive layer, a piezoelectric layer, and another planar electrode. In order to make the OAT operate in real-time, the photoconductive layer must have rise and decay times of less than 3.3 psec with a suitable switching ratio of dark to illuminated resistivities. A fast-reacting photoconductive layer of CdS has been fabricated by sputtering with a gas of 99% Ar and 1% H2S. Rise and decay times of about 3 psec have been measured. By controlling the temperature of the substrate holder, the dark and illuminated resistivities can LI made to have switching ratios of 102 Ω-cm to 10 Ω-cm. This is the correct range of values needed for real-time operation.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kung-Yen Su and Glen Wade "Fabrication Of An Optically Activated Transducer For Real-Time Diagnostic Imaging", Proc. SPIE 0372, Physics and Engineering in Medical Imaging, (1 November 1982); https://doi.org/10.1117/12.934525
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cadmium sulfide

Acoustics

Switching

Sputter deposition

Electrodes

Argon ion lasers

Imaging systems

RELATED CONTENT

Optics In Medical Ultrasonics
Proceedings of SPIE (August 18 1980)
A Transmitter For Diagnostic Imaging
Proceedings of SPIE (December 30 1976)

Back to Top