Paper
2 June 1988 Bit-Error Reduction In Magneto-Optical Disks
M. Moribe, Y. Hashimoto, M. Maeda, K. Itoh, S. Ogawa
Author Affiliations +
Proceedings Volume 0899, Optical Storage Technology and Applications; (1988) https://doi.org/10.1117/12.944609
Event: 1988 Los Angeles Symposium: O-E/LASE '88, 1988, Los Angeles, CA, United States
Abstract
The number of bit errors in magneto-optical disks were reduced and a bit-error rate of 10-6 was achieved even after an accelerated lifetime test. To reduce the number of bit errors, we performed error detection and classification and found that the substrate was the dominant cause of errors. The substrate we used was a photopolymer(2P)-glass substrate, and we found two types of defect origin. One of them was due to 2P residues on the stamper, and the other was due to dust adhering to the substrate. We reduced the initial bit-error rate by removing these defects. We also found that 2P impurities considerably increase the bit-error rate during the accelerated lifetime test. By purifying the 2P, we made our disks more stable, and estimated that their lifetime would exceed 20 years at 40°C and 90% RH.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Moribe, Y. Hashimoto, M. Maeda, K. Itoh, and S. Ogawa "Bit-Error Reduction In Magneto-Optical Disks", Proc. SPIE 0899, Optical Storage Technology and Applications, (2 June 1988); https://doi.org/10.1117/12.944609
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computing systems

Nitrogen

Optical discs

Optical storage

Oxidation

Plasma

Technologies and applications

Back to Top