Paper
26 April 1989 Wide Aperture X-Ray Preionized Excimer Laser With Variable Cross-Section Using Flat Electrodes
Michael Steyer, Ouyang Bin, Krassimir A. Stankov, Gabor Szabo, Hakaru Mizoguchi, Fritz P. Schafer
Author Affiliations +
Proceedings Volume 1023, Excimer Lasers and Applications; (1989) https://doi.org/10.1117/12.950130
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany
Abstract
An X-ray preionized discharge-pumped XeCl laser with two flat electrodes and a variable active volume of up to 1 1 is described. A charge-transfer circuit is employed with low-inductance water capacitors. The laser beam width is determined by X-ray collimators. Beam cross-sections up to 4x5 cm2 have been achieved. The laser pulse energy exceeds 3 J in a 40 ns pulse (FWHM). The dependence of output energy on gas pressure, charging voltage and beam width as well as the X-ray preionizer performance are presented.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Steyer, Ouyang Bin, Krassimir A. Stankov, Gabor Szabo, Hakaru Mizoguchi, and Fritz P. Schafer "Wide Aperture X-Ray Preionized Excimer Laser With Variable Cross-Section Using Flat Electrodes", Proc. SPIE 1023, Excimer Lasers and Applications, (26 April 1989); https://doi.org/10.1117/12.950130
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Electrodes

Capacitors

Pulsed laser operation

Excimer lasers

Laser energy

Lead

RELATED CONTENT

Timing of the x ray preionization of a discharge pumped...
Proceedings of SPIE (December 22 1998)
200 W spiker-sustainer XeCl laser
Proceedings of SPIE (August 16 1994)
Parametric study of small volume long pulse x ray preionized...
Proceedings of SPIE (September 01 1991)
Wide-aperture electric-discharge XeCl lasers
Proceedings of SPIE (May 03 2004)

Back to Top