Paper
8 March 2017 Radiation temperature measurement of optical thick hypersonic combustion flow
Bin Qi, Li-song Zhang, Wei Dong, Ning Tian, Ling Zhao, Yijie Pan, Yun-long Zhao
Author Affiliations +
Proceedings Volume 10255, Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016; 102551S (2017) https://doi.org/10.1117/12.2267038
Event: Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016, 2016, Jinhua, Suzhou, Chengdu, Xi'an, Wuxi, China
Abstract
Temperature is a critical parameter to diagnose the high temperature hypersonic combustion flow. A fiber-spectrometer based measurement system and the correlated theoretical models to measure the radiation temperature of the “optical thick” hypersonic combustion flow were established in this paper. The spectral responsivity of the fiber-spectrometer based measurement system was measured at NIM in lab condition, and the spectral radiance and emissivity of the hypersonic combustion flow were measured in-situ at the combustion wind tunnel of BISLMV. Preliminary experimental results showed the spectral emissivity of the combustion flow was about 0.1 in the spectral range 500-800nm without strong spectral selection, which resulted in the radiation temperature about 2200 K, with relative standard uncertainty about 10%.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bin Qi, Li-song Zhang, Wei Dong, Ning Tian, Ling Zhao, Yijie Pan, and Yun-long Zhao "Radiation temperature measurement of optical thick hypersonic combustion flow", Proc. SPIE 10255, Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016, 102551S (8 March 2017); https://doi.org/10.1117/12.2267038
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Combustion

Temperature metrology

Calibration

Optical testing

Spectral calibration

Chemical species

Reflectivity

Back to Top