Calibrated plant height estimates with structure from motion from fixed-wing UAV images

Xiongzhe Han; J. Alex Thomasson; Cody Bagnall; N. Ace Pugh; David W. Horne; William L. Rooney; L. Malambo; Anjin Chang; Jinha Jung; Dale A. Cope

doi:10.1117/12.2305746

21 May 2018 Calibrated plant height estimates with structure from motion from fixed-wing UAV images

Xiongzhe Han, J. Alex Thomasson, Cody Bagnall, N. Ace Pugh, David W. Horne, William L. Rooney, L. Malambo, Anjin Chang, Jinha Jung, Dale A. Cope

Author Affiliations +

Proceedings Volume 10664, Autonomous Air and Ground Sensing Systems for Agricultural Optimization and Phenotyping III; 106640D (2018) https://doi.org/10.1117/12.2305746
Event: SPIE Commercial + Scientific Sensing and Imaging, 2018, Orlando, FL, United States

Abstract

Field-based high-throughput phenotyping is a bottleneck to future breeding advances. The use of remote sensing with unmanned aerial vehicles (UAVs) can change the way agricultural research operates by increasing the spatiotemporal resolution of data collection to monitor status of plant growth. A fixed-wing UAV (Tuffwing) was operated to collect images of a sorghum breeding research field with 70% overlap at an altitude of 120 m. The study site was located at Texas A and M AgriLife Research’s Brazos Bottom research farm near College Station, Texas, USA. Relatively high-resolution (>2.7cm/pixel) images were collected from May to July 2017 over 880 sorghum plots (including six treatments with four replications). The collected images were mosaicked and structure from motion (SfM) calculated, which involves construction of a digital surface model (DSM) by interpolation of 3D point clouds. Maximum plant height for each genotype (plot) was estimated from the DSM and height calibration implemented with aerial measured values of groundcontrol points with known height. Correlations and RMSE values between actual height and estimated height were observed over sorghum across all genotypes and flight dates. Results indicate that the proposed height calibration method has a potential for future application to improve accuracy in plant height estimations from UAVs.

Conference Presentation

Citation Download Citation

Xiongzhe Han, J. Alex Thomasson, Cody Bagnall, N. Ace Pugh, David W. Horne, William L. Rooney, L. Malambo, Anjin Chang, Jinha Jung, and Dale A. Cope "Calibrated plant height estimates with structure from motion from fixed-wing UAV images", Proc. SPIE 10664, Autonomous Air and Ground Sensing Systems for Agricultural Optimization and Phenotyping III, 106640D (21 May 2018); https://doi.org/10.1117/12.2305746

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available