Extensive microstructural quality control inside a machine tool using multiwavelength digital holography

T. Seyler; M. Fratz; T. Beckmann; A. Bertz; D. Carl; V. Grün; R. Börret; F. Ströer; J. Seewig

doi:10.1117/12.2319750

7 September 2018 Extensive microstructural quality control inside a machine tool using multiwavelength digital holography

T. Seyler, M. Fratz, T. Beckmann, A. Bertz, D. Carl, V. Grün, R. Börret, F. Ströer, J. Seewig

Author Affiliations +

Proceedings Volume 10834, Speckle 2018: VII International Conference on Speckle Metrology; 108342B (2018) https://doi.org/10.1117/12.2319750
Event: SPECKLE 2018: VII International Conference on Speckle Metrology, 2018, Janów Podlaski, Poland

Abstract

With state-of-the-art 3D measurement systems, short-wave structures such as tool marks cannot be resolved directly inside a machine tool chamber. Up to now, measurements had to be performed outside the machine tool. We present an interferometric sensor that carries out such measurements inside the machine tool, which saves time-consuming and expensive setup procedures. Our sensor HoloCut uses digital holography as measurement principle. By the use of multiple wavelengths, we get a large unambiguous axial measurement range of up to 2 mm and achieve micron repeatability, even in the presence of laser speckles. With a lateral resolution of 7 μm across the entire 20 x 20 mm² field of view, both macro- and microstructures (such as tool marks) are measured with an axial resolution of 1 μm. Consequently, this qualifies HoloCut for in-situ measurements and integration in a machine tool. In this paper, the boundary conditions of integrating interferometers inside a machine tool are evaluated. Occurring vibrations and limited available space are particularly challenging constraints: The optical and mechanical design of HoloCut is introduced along with numerical correction algorithms: A piezo-stage setup is used to induce known displacements. Using these algorithms, measurements even with a closed-loop control of the machine tool head activated are demonstrated on a coin measurement. The use of HoloCut is motivated on the base of the daily operation of a 5-axis machine tool: We present an evaluation of an exemplary ISO 25178 parameter Sq using HoloCut measurements and compare those with reference, yet not inline-capable systems.

Citation Download Citation

T. Seyler, M. Fratz, T. Beckmann, A. Bertz, D. Carl, V. Grün, R. Börret, F. Ströer, and J. Seewig "Extensive microstructural quality control inside a machine tool using multiwavelength digital holography", Proc. SPIE 10834, Speckle 2018: VII International Conference on Speckle Metrology, 108342B (7 September 2018); https://doi.org/10.1117/12.2319750

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available