Paper
18 December 2019 Study on corrosion of optical glass
Author Affiliations +
Proceedings Volume 11342, AOPC 2019: AI in Optics and Photonics; 113420H (2019) https://doi.org/10.1117/12.2547469
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
The corrosion of optical glass has become the main factor affecting the qualified rate of products, so it is urgent to solve the corrosion of products. It has been found that under the same cleaning conditions, corrosion mostly occurs on the small side, that is, the first side of polishing, while the other side is not corroded. This indicates that cleaning has little effect on the corrosion of fiberboard. Corrosion occurs in polishing and the process of upper and lower discs. According to the different conditions of two-sided processing, the causes and influencing factors of corrosion were analyzed. By refining the processing technology and adjusting the proportions of protective paint, turning temperature and water stain and other process parameters to achieve the goal of effective controlling the corrosion within 2%.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
You Zhou, Jiuwang Wang, Yun Wang, Yang Fu, Ran Zhao, and Peng Jiao "Study on corrosion of optical glass", Proc. SPIE 11342, AOPC 2019: AI in Optics and Photonics, 113420H (18 December 2019); https://doi.org/10.1117/12.2547469
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Corrosion

Coating

Glasses

Polishing

Optical fibers

Surface finishing

RELATED CONTENT

Novel coating and photofabrication techniques for astronomy
Proceedings of SPIE (September 24 2004)
Fabrication of high-quality cavity mirror
Proceedings of SPIE (October 06 2000)
MRF with adjustable pH
Proceedings of SPIE (September 21 2011)

Back to Top