Poster + Paper
8 November 2020 Developing the kinematic model of the EOS scanning
Sergey A. Sinyutin, Alexander A. Gorbunov, Alexander Y. Kisner, Maria Petrovna Soldatova
Author Affiliations +
Conference Poster
Abstract
The Earth orientation sensor (ERS) device installed on board the spacecraft (SC) is discussed. In this device related to the local vertical reference, the so-called circular scanning principle is implemented. The circular scanning principle implies the angular field being scanned in a circumferential direction, with the angular radius coinciding with the angular radius of the Earth, and the signal of the receiving device being detected by two phase-sensitive detectors, which generate signals that determine the deviation of the instrument's optical reference axis from the vertical in two mutually perpendicular planes. Provided a mathematical description of the kinematic model of the Earth orientation sensor (EOS). Performed the validation of the analytical description of the device by using the Matlab system and with a model-based approach. As a result, defined that for reliable recognition of four points of the Earth-Space border intersection, it is desirable that the time between transitions approaches to 125ms. Thus, to receive a substantial measurement base on Z axis the angle at the apex of the scanning cone should be reduced. Modeling has shown that the optimal angle at the apex of the scanning cone for an orbital altitude range of 200-2000 km is 55 degrees.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergey A. Sinyutin, Alexander A. Gorbunov, Alexander Y. Kisner, and Maria Petrovna Soldatova "Developing the kinematic model of the EOS scanning", Proc. SPIE 11525, SPIE Future Sensing Technologies, 115252W (8 November 2020); https://doi.org/10.1117/12.2587427
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Kinematics

Sensors

Signal detection

Mathematical modeling

Instrument modeling

MATLAB

Model-based design

RELATED CONTENT


Back to Top