Presentation + Paper
4 March 2022 Extremely low material consumption III/V solar cell
Author Affiliations +
Abstract
III/V semiconductor solar cells feature the highest photon conversion efficiencies (PCE), but they are still too expensive for terrestrial application. Conventional nanowire (NW) solar cells already partially resolve this issue since they can be grown on a silicon substrate and feature a low filling factor (the ratio of the 180 nm NW diameter to 500 nm NW pitch, squared). We take the next step by depositing PMMA micro-lenses with a diameter of 6 μm on top of a NW-array with the same 6 μm pitch, allowing to reduce the material consumption by more than 3 orders of magnitude. According to our FDTD simulations, the material consumption can even be further decreased by reducing the NW length with a factor of 2 down to 1 μm, since the lens is focusing the solar radiation near the top of the nanowires. We also expect a significantly increased Voc due to an increased internal radiative efficiency (IRE) at a higher excitation power. Preliminary measurement show an increase in Voc of at least 50 mV for randomly positioned microlenses on top of a dense NW array with 0.5 μm pitch.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
I. Kolpakov, E. A. Bochicchio, K. Korzun, P. A. L. M. Koolen, B. van Gorkom, W. J. H. Berghuis, R. Veldhoven, and J. E. M. Haverkort "Extremely low material consumption III/V solar cell", Proc. SPIE 11996, Physics, Simulation, and Photonic Engineering of Photovoltaic Devices XI, 1199607 (4 March 2022); https://doi.org/10.1117/12.2608529
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nanowires

Solar cells

Microlens

Absorption

Microlens array

Measurement devices

Polymethylmethacrylate

Back to Top