Preparation of conductive layer of microchannel plate based on atomic layer deposition technology  and its influence on electrical properties

Tiezhu Bao; Qing Li; Xiaoxuan Shi; Chang Liu; Jing Ma; Shuaiqi Li; Hui Liu

doi:10.1117/12.2627371

27 March 2022 Preparation of conductive layer of microchannel plate based on atomic layer deposition technology and its influence on electrical properties

Tiezhu Bao, Qing Li, Xiaoxuan Shi, Chang Liu, Jing Ma, Shuaiqi Li, Hui Liu

Author Affiliations +

Proceedings Volume 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications; 12169CO (2022) https://doi.org/10.1117/12.2627371
Event: Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 2021, Kunming, China

Abstract

Microchannel Plate (MCP) is an advanced two-dimensional electron multiplier device, which has excellent characteristics of transmitting and enhancing electronic images. Atomic Layer Deposition (ALD) is a thin film growth technology, which is very suitable for the structural design of the inner wall of MCP. The purpose of adjusting the performance of MCP can be achieved by uniformly depositing materials with different thicknesses and specific properties on the inner wall. In this paper, conductive layer of MCP was prepared by ALD. The resistance characteristics of ALD-MCP prepared by the above process were tested by MCP photoelectric imaging comprehensive tester. The effects of ZnO percentage, ZnO/Al2O3 structure, conductive layer thickness and deposition temperature on the resistance of ALD-MCP were systematically analyzed and studied. On this basis, the structure of ALD-MCP conductive layer is optimized. The results show that when the ZnO percentage is 26%~30%, the conductive layer structure is designed as [15Zn:(40~42) Al] * 6, and the conductive layer thickness is 30~40nm, the MCP with resistance of 50~200MΩ can be obtained, which meets the needs of practical application. Finally, the resistance characteristics of ALD-MCP were tested, and the conduction mechanism was analyzed by XPS technology. The results show that the ALD-MCP conductive layer has a negative temperature resistance coefficient, and the I-V curve conforms to Ohmic law in the low voltage region. However, with the increase of applied voltage, the slope of the I-V curve increases, showing the phenomenon of space charge limiting conduction (SCLC), which may be related to the concentration of oxygen vacancy in the conductive layer.

Citation Download Citation

Tiezhu Bao, Qing Li, Xiaoxuan Shi, Chang Liu, Jing Ma, Shuaiqi Li, and Hui Liu "Preparation of conductive layer of microchannel plate based on atomic layer deposition technology and its influence on electrical properties", Proc. SPIE 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 12169CO (27 March 2022); https://doi.org/10.1117/12.2627371

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Microchannel plates

Resistance

Zinc oxide

Aluminum

Atomic layer deposition

Oxygen

Structural design

Show All Keywords

Keywords/Phrases

Search In:

Publication Years