Paper
20 October 2022 The design of paper counting device based on STM32
Wanping Li, Jundong Xie
Author Affiliations +
Proceedings Volume 12451, 5th International Conference on Computer Information Science and Application Technology (CISAT 2022); 1245111 (2022) https://doi.org/10.1117/12.2656762
Event: 5th International Conference on Computer Information Science and Application Technology (CISAT 2022), 2022, Chongqing, China
Abstract
This paper introduces a paper counting device. The system consists of STM32 core board, FDC2214 module, OLED display module, buzzer module, key module, and two parallel plates. Two copper clad plates with a side length of 50mm square are used as capacitance plates, and the paper to be measured is placed in the middle, and the capacitance value between the two plates is collected by FDC2214 and the collected data is transmitted to the MCU controller through the IIC serial bus. The controller through the algorithm converted to the corresponding number of paper values displayed in the OLED display. The system sets self-calibration mode according to adjust the size of capacitance.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wanping Li and Jundong Xie "The design of paper counting device based on STM32", Proc. SPIE 12451, 5th International Conference on Computer Information Science and Application Technology (CISAT 2022), 1245111 (20 October 2022); https://doi.org/10.1117/12.2656762
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capacitance

Sensors

Telecommunications

Capacitors

Information operations

Signal processing

Embedded systems

Back to Top